SBDC-L Archives

Sooner Ballroom Dance Club

SBDC-L@LISTS.OU.EDU

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
Sooner Ballroom Dance Club <[log in to unmask]>
Subject:
From:
Horst Severini <[log in to unmask]>
Date:
Thu, 29 Jan 2004 00:16:17 -0600
Content-Type:
TEXT/plain; charset=us-ascii
MIME-Version:
1.0
Reply-To:
Horst Severini <[log in to unmask]>
Parts/Attachments:
TEXT/plain (102 lines)
Hi, and welcome to the Sooner Ballroom Dance Club list server!

We just created this list so that every club member can send email
to the list. To do so, just send mail to [log in to unmask],
and it will be forwarded to all list subscribers.
You have to send it from the email address which you are subscribed with,
though, otherwise the list server will reject it.

To unsubscribe from the list, send an email to [log in to unmask] with

SIGNOFF SBDC-L

in the body of the mail. Again, from the email address you are subscribed with.

If you would like to follow the list archive on the web, look at

http://lists.ou.edu/archives/sbdc-l.html

For more information about the list, please look at the detailed
information below. You might want to save it for further reference.

If you have any questions, please send email to our illustrious
club president Delanie at [log in to unmask], or reply to this email.

See you out dancing,

        Horst

--------
You have been  added to the SBDC-L mailing list  (Sooner Ballroom Dance
Club) by Horst Severini <[log in to unmask]>.

Please save this message for future  reference, especially if this is the
first time you are subscribing to an electronic mailing list. If you ever
need to leave  the list, you will find the  necessary instructions below.
Perhaps  more importantly,  saving a  copy of  this message  (and of  all
future subscription notices  from other mailing lists) in  a special mail
folder will give you instant access to the list of mailing lists that you
are subscribed  to. This may  prove very useful the  next time you  go on
vacation and  need to leave  the lists temporarily so  as not to  fill up
your  mailbox while  you  are away!  You should  also  save the  "welcome
messages" from the  list owners that you will  occasionally receive after
subscribing to a new list.

To send  a message to  all the people  currently subscribed to  the list,
just send  mail to [log in to unmask]  This is called "sending  mail to
the list," because  you send mail to a single  address and LISTSERV makes
copies   for  all   the  people   who  have   subscribed.  This   address
([log in to unmask]) is also  called the "list address."  You must never
try to send  any command to that  address, as it would  be distributed to
all the  people who  have subscribed.  All commands must  be sent  to the
"LISTSERV  address,"  [log in to unmask]  It  is  very  important  to
understand  the difference  between the  two, but  fortunately it  is not
complicated. The LISTSERV address is like  a FAX number that connects you
to  a machine,  whereas the  list  address is  like a  normal voice  line
connecting you to a person. If you make a mistake and dial the FAX number
when you wanted to talk to someone on the phone, you will quickly realize
that you  used the wrong  number and call again.  No harm will  have been
done. If on the other hand  you accidentally make your FAX call someone's
voice  line,  the  person  receiving the  call  will  be  inconvenienced,
especially if your FAX then re-dials  every 5 minutes. The fact that most
people will eventually connect the FAX machine to the voice line to allow
the FAX  to go through  and make  the calls stop  does not mean  that you
should continue to send FAXes to  the voice number. People would just get
mad at you.  It works pretty much  the same way with  mailing lists, with
the difference  that you are calling  hundreds or thousands of  people at
the same  time, and consequently  you can expect a  lot of people  to get
upset if you consistently send commands to the list address.

You may leave the list at any  time by sending a "SIGNOFF SBDC-L" command
to [log in to unmask] You  can also tell LISTSERV how you  want it to
confirm the receipt of messages you send to the list. If you do not trust
the system, send a "SET SBDC-L  REPRO" command and LISTSERV will send you
a copy  of your own messages,  so that you  can see that the  message was
distributed and  did not get  damaged on the way.  After a while  you may
find that this is getting annoying,  especially if your mail program does
not tell you  that the message is  from you when it informs  you that new
mail has  arrived from  SBDC-L. If  you send a  "SET SBDC-L  ACK NOREPRO"
command, LISTSERV  will mail you  a short acknowledgement  instead, which
will look  different in your  mailbox directory. With most  mail programs
you will  know immediately that this  is an acknowledgement you  can read
later. Finally,  you can turn  off acknowledgements completely  with "SET
SBDC-L NOACK NOREPRO".

Following  instructions from  the list  owner, your  subscription options
have been set  to "NOACK REPRO" rather than the  usual LISTSERV defaults.
For more  information about subscription  options, send a  "QUERY SBDC-L"
command to [log in to unmask]

Contributions sent to this list are automatically archived. You can get a
list of the available archive files  by sending an "INDEX SBDC-L" command
to  [log in to unmask] You  can then  order these  files with  a "GET
SBDC-L LOGxxxx" command, or  using LISTSERV's database search facilities.
Send an "INFO DATABASE" command for more information on the latter.

This  list is  available  in digest  form.  If you  wish  to receive  the
digested version of the postings, just issue a SET SBDC-L DIGEST command.

More  information on  LISTSERV  commands  can be  found  in the  LISTSERV
reference  card, which  you can  retrieve  by sending  an "INFO  REFCARD"
command to [log in to unmask]

ATOM RSS1 RSS2