Hi, Zac,
Thanks for your information! When do your guys start these activities?
Thank you.
YCQ
From: OU Amateur Radio Club [mailto:[log in to unmask]] On Behalf Of Zac Flamig
Sent: Thursday, June 27, 2013 9:05 AM
To: [log in to unmask]
Subject: Fwd: Altium/PCB/soldering training for students
Some of you guys might be interested in this too.
Zac
-------- Original Message --------
Subject: | Altium/PCB/soldering training for students |
Date: | Wed, 26 Jun 2013 22:13:56 +0000 |
From: | Fulton, Caleb J. <[log in to unmask]> |
To: |
Greetings,
We have been preparing for a training event that will allow students to become more familiar with the process of designing, fabricating, and populating (soldering) very circuit boards using the equipment and software that we use most often here at the ARRC. We’ll be doing this in the form of a group exercise in moving all the way from a schematic to working prototype of a “noise maker” (pictured below) that runs off of a 9V battery.
It’s a single-sided (non-plated) PCB that will be designed from “scratch” in Altium, milled on the milling machine, and then soldered using the lab equipment. There will be three separate training sessions available to the students—Altium (software only), milling, and soldering—and students are encouraged to participate in as many as they can. Each event will likely take about 5 hours to complete.
The overall goal of this endeavor is to bring students up to speed with these important prototyping skills/tools so that these training processes do not have to repeat individually for each student! The prototype above is working, and we’d like to complete this activity by the end of the summer for the first round of “trainees.”
If you could send me a list of students who you would like to participate (if you’re faculty) or indicate individually that you are interested (if you are a student or a bored faculty member), I will begin setting up a schedule for these events. If you have students/friends who are not on the [log in to unmask] list, feel free to extend this invitation to them as well.
Best,
Dr. Caleb Fulton
Assistant Professor of Electrical and Computer Engineering
The University of Oklahoma - Advanced Radar Research Center
110 West Boyd St., room 331, Norman, OK 73019
Off: (405)-325-4278 / Cell: (317)-908-1555
Skype: caleb.fulton
Google: caleb.j.fulton
